V8 Engine Hood Fan Radiator for Traxxas Trx4
Features:
.V8 engine model length*width *height: 70mm*70mm*55mm
.Weighing 113g, it needs to be assembled by itself.
.Built-in temperature sensor, automatic control fan on or off, power supply operating temperature 35 ° C ± 5 ° C, reset temperature 25 ° C ± 5 ° C, temperature sensor has been welded on the fan, high speed fan, bringing up to 3.25 CFM ± 10 % of the wind
.The main body bracket aluminum alloy + stainless steel, cylinder head, exhaust pipe is black high temperature resistant ABS plastic, the default is black, can be colored according to personal preference, this product does not contain the mushroom head needs to be purchased separately.
.The details are in place, the simulation is high, and the work is good.
.The product does not contain a motor.
.The product is installed in the original position of traxxas trx4
.Note: 1. The side of the exhaust manifold component needs to be removed to have enough position to be installed. 2. The original car shell strut connecting crossbar needs to be cut out of the intake pipe and accessories to be installed. 3. With DJC- There is a conflict between the 0640 center console and the DJC-0617 interior. The original motor position cannot be shared. To share, you must use the motor front kit (not including additional purchase) to achieve perfect results.
.The front engine kit must be read before installation: 1. Remove the exhaust manifold and install it directly on the original suspension bracket and fender 2. To install the exhaust manifold, you must use the DJC-0226 metal suspension bracket to have enough Space to the left and right sides of the exhaust manifold transparent hood cover DJC-0644&DJC-0645
.Must read before installation: 1. Must be equipped with DJC-0667 engine case fixing kit (not included), to fix the car cylinder head, ignition high voltage coil, hood, exhaust manifold, intake pipe, fuel rail material It is a black high temperature resistant ABS engineering plastic material, which can be colored according to personal preference. The cylinder block and the oil dipstick are made of 304 stainless steel material, and the heat sink is made of aluminum alloy material.
.Suitable for people aged 14 and over
Specifications:
.Color: As Shown
.Material: Aluminum Alloy + Stainless Steel + ABS Plastic
.Product Dimensions: 7 x 7 x 5.5cm
.Product Weight: 113g
.Package Dimensions: 12 x 12 x 11cm
.Package Weight: 320g
.Packing: Box
Package Content:
.1 x Fan Radiator